To build a Maze Runner game on your ESP32 with a joystick and a 0.9-inch OLED screen, I’ll outline the basic setup and give you the skeleton code to get started. The game will allow you to control a player…
To set up and use the ESP32-CAM with an FTDI module for uploading code and communication, follow these steps carefully. I’ll guide you through the hardware connections and provide you with an example code to get started. Components Needed: Step…
Creating a simple game using the ESP32, Joystick, and an OLED display can be a fun project! Let’s create a basic “Dodge the Block” game where a player controls a character (represented by a square) on the screen using a…
a Bluetooth module like the HC-05 or HC-06, which communicates over serial. The mobile app can send simple commands (like “F” for forward, “B” for backward, “S” for stop, etc.) via Bluetooth to control the motors. Steps: Motor Driver Shield…
This project demonstrates how to control two DC motors using an Arduino Nano, a L298 Motor Driver, and a Bluetooth HC-05 module. The motors can be controlled wirelessly from a mobile device using a Bluetooth app, which communicates with the…
Components: Wiring Connection: Code: Explanation of Code: Threshold Adjustment: Testing:
To create a simple light-sensitive alarm system using a Light Dependent Resistor (LDR) and a buzzer, you can follow these steps using an Arduino microcontroller, LDR, and a buzzer. Here’s how to build the system: Components Needed: Circuit Diagram: Code…
The SmartTime Watch is an Arduino-based smartwatch that displays the current date and time on an OLED screen when you bring your hand near an IR sensor. Using a Real-Time Clock (RTC) module, the watch accurately shows the date and…
This project will allow you to control a small DC motor (representing the fan) based on motion detected by a PIR sensor. When the sensor detects motion, the motor will turn on, and when no motion is detected, the motor…
Here’s how you can build a water level monitoring system using an Arduino and a water level sensor, with the water percentage displayed on an I2C LCD. Components Required: 1. Wiring the Components: Water Level Sensor: I2C LCD: 2. Arduino…