To connect an IR sensor with an ESP32 and make an LED glow when the sensor detects something, here’s a simple Arduino code to get you started: Components: Wiring: Arduino Code: How It Works: Explanation: Note: Upload the code to…
To interface an OLED display with an ESP32, you can use an OLED display that communicates over the I2C protocol, which is common for many small OLED displays. Below are the connection details, code example, and explanation to help you…
To interface an I2C LCD with an ESP32, you need to connect the LCD to the ESP32 using the I2C protocol and then write code to control it. Here’s how to do that: Hardware Connection: Here’s the wiring: Arduino Code:…
Creating a traffic signal project using the ESP32 involves controlling LEDs that simulate the traffic light signals (red, yellow, green) based on a timed sequence. Below is a step-by-step guide for the traffic signal project using the ESP32: Components Needed:…
Here’s a simple guide with code and wiring connections to interface a servo motor with an ESP32 Components: Wiring Connections: Code: Explanation: Notes: That’s it! You’ve now interfaced a servo motor with the ESP32.
Before we dive into the ESP32 tutorial series, let’s explore some of its key features: These features make the ESP32 an excellent choice for embedded systems, IoT devices, robotics, and more. To blink an LED using an ESP32, here’s a…
Project Overview The Arduino will read the analog values from the sound sensor using the analogRead() function. These readings represent the intensity of the sound detected by the sensor. The higher the value, the louder the sound. The sensor will…
In this project, we’ll create a simple color detection system using the TCS3200 color sensor with an Arduino. When the sensor detects a specific color, it will light up the corresponding LED — Red, Green, or Blue. The TCS3200 sensor…
In this blog, we will walk you through how to create a simple project using an Arduino and an Ultrasonic Sensor (HC-SR04) to trigger a voice playback on an ISD1820 Voice Recording Module when a person or object comes within…
This project involves creating a simple calculator using an Arduino, a 4×4 keypad, and an I2C LCD to display results. Below are the complete details for the project, including wiring, components, and code. Hardware Required: Step 1: Wiring the Components…