In this project, you’ll learn how to build a Wi-Fi-controlled surveillance car using the ESP32-CAM module. It streams live grayscale video and can be controlled remotely from any smartphone or computer browser — no apps required! Features Components Required Component…

Controlling electronics with voice commands is one of the most exciting applications of IoT and embedded systems. In this project, you’ll learn how to build a voice-controlled LED system using an Arduino Uno, an HC-05 Bluetooth module, and a mobile…

Automatically adjust the fan speed based on the measured temperature using the DHT11 sensor and L298N motor driver. Components Required: Component Qty Arduino Uno/Nano 1 L298N Motor Driver 1 DHT11 or DHT22 Sensor 1 DC Fan (5V or 12V) 1…

You will build a robotic car that responds to voice commands via a Bluetooth module (HC-05). The voice commands will be converted to text using a mobile app like “Arduino Voice Control”, then transmitted over Bluetooth to the Arduino, which…

Components Required Wiring Connections Soil Moisture Sensor: I2C LCD Module: For Arduino Mega: SDA = Pin 20, SCL = Pin 21Ensure your I2C LCD uses the 0x27 or 0x3F I2C address (you can scan with I2C scanner sketch if needed)…

In this DIY project, we will build a Fire-Fighting Robot that can detect and extinguish fire using flame sensors and a water-spraying mechanism. This robot is an ideal starter project for those interested in robotics, Arduino, and embedded systems. Overview…

We will build a simple Human Following Robot using Arduino, an Adafruit Motor Shield, an ultrasonic sensor, and IR sensors. The robot will detect and follow a person based on their position relative to the sensors. Components Required Component Description…

Here’s a complete guide to build a Line Follower Robot using Arduino. This includes hardware requirements, circuit design, and Arduino code. Components Required Wiring Guide IR Sensor (2-sensor configuration example): L298N Motor Driver: Logic IR1 (Left) IR2 (Right) Action LOW…

If you are building an obstacle-avoiding robot using four DC motors, an ultrasonic sensor, and a servo motor for directional scanning. Below are the complete details including components, wiring, and setup. ✅ Components List 🔌 Wiring Connections 🟦 Motor Connections…

Here’s a complete Arduino sketch to interface a BMP180 sensor with an OLED display using the Adafruit libraries. This code reads temperature and pressure from the BMP180 and displays it on a OLED screen. Hardware Required Libraries to Install (via…